Electric film winder FM-100-C

Scope of use: Sunshade inside and outside the greenhouse.

Key words:

Classification:

Electric film winder

Keyword： Electric film winder FM-100-C

E-mail:

15867139502@163.com

Message

Details

Model	FM-100-C	FM-60-C
Power	100W	60W
Torque	100N-m	60N-m
Current	≤ 0.8A	≤ 0.5A
Voltage	AC220V 20V
Speed	50N-m	3.3r/min	30N-m	3.3r/min
	100N-m	2.8r/min	60N-m	2.8r/min
Specifications of roll film tube (top opening/side opening)	3/4 "(ODΦ27) or 1/2 "(ODΦ22)
Roll film length (recommend)	3/4 "roll film tube
	100m (long) x 4m (high)		75m (long) x 4m (high)
Guide tube specifications (recommend)	3/4 "(OD approx.Φ27)
Working stroke (by output shaft revolutions)	60 turns
Protection level	IP55

Application Case

Specifically related to the field of machinery, including a stable substrate, the upper surface of which is provided with a sliding groove, and two sliding mechanisms are slidably connected inside the sliding grooves. The upper ends of the two sliding mechanisms are fixedly connected to a frame plate, and the side edges of the frame plate are rotatably connected to adjustment screws through bearings. The other end of the two adjustment screws is threaded with a stable base This utility model sets up a frame plate, and the second damping spring is set at the gap between the sliding rod and the damping rod, so that when the driving motor runs in turbulence, the dynamic generated by the shaking is transmitted to the bottom of the first damping spring and the second damping spring. Due to the reaction force of the first damping spring and the second damping spring, the vibration force is limited and partially offset, thus achieving the stability of the cycloidal reducer

Related Products