What tools and cleaning agents should be used when cleaning the film roller?

1. tools

Soft brush: Choose a soft brush, such as a wool brush or nylon brush, to remove dust and debris on the surface of the film roller. The soft brush can avoid scratching the casing of the film roller.

Clean cloth: Use a soft, lint-free cloth, such as cotton cloth or microfiber cloth, to wipe the surface of the film reel. The rag can remove stains and residual cleaning agent.

Small screwdriver: If you need to remove the film reel for more thorough cleaning, you can prepare some small screwdrivers for removing screws and parts.

2. cleaner

Gentle soapy water: Soapy water can be made with warm water and a small amount of neutral soap. Soapy water can remove the dirt and grease on the surface of the film roller without causing damage to the material of the film roller.

Special cleaning agents: There are some special cleaning agents on the market for cleaning agricultural equipment and plastic products. These cleaning agents usually have the characteristics of strong detergency and no damage to the material. You can choose the appropriate cleaning agent according to the product description.

Alcohol: Medical alcohol or industrial alcohol can be used to clean the metal parts and electrical contacts of the film roller. Alcohol is volatile and can be quickly dried, while removing oil and impurities.

When using cleaning agents, pay attention to the following points:

Avoid using strong acids, strong alkalis or corrosive cleaning agents to avoid damage to the housing and internal components of the film reel.

Dilute and use according to the instructions for use of the detergent, and avoid using excessive detergent.

Before cleaning, disconnect the power supply of the film winding device to avoid electric shock accident.

After cleaning, dry the surface of the film reel with a clean cloth to avoid rust or electrical failure caused by moisture residue.

In addition, regular cleaning of the film reel can keep it in good working condition, but also be careful not to clean it too frequently to avoid unnecessary wear and tear on the film reel. If the film retractor fails or is damaged, it should be repaired or replaced in time.